Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel.
Saved in:
| Title: | Sensitivity of the residual topography to single crystal plasticity parameters in Berkovich nanoindentation on FCC nickel. |
|---|---|
| Authors: | Renner, E.1, Gaillard, Y.1, Richard, F.1 fabrice.richard@univ-fcomte.fr, Amiot, F.1, Delobelle, P.1 |
| Source: | International Journal of Plasticity. Feb2016, Vol. 77, p118-140. 23p. |
| Subjects: | Nickel compounds, Sensitivity analysis, Topography, Material plasticity, Face centered cubic structure, Nanoindentation tests |
| Abstract: | Fundamental deformation mechanisms of FCC materials under indentation have been probed at the grain scale. Experimental tests have been conducted on large-grained annealed and cold-worked polycrystalline nickel samples with a Berkovich indenter. Indentation axes have been chosen to be close to the three main crystallographic directions [001], [101] and [111]. Pile-ups and slip traces have been revealed around the residual imprints by analysing topographic measurements obtained by atomic force microscopy. It is shown that the indenter orientation in each indentation plane drives pile-ups and slip traces which in turn contain precious information about the crystallographic orientation and the hardening state of the studied grain. Imprint topographies after pile-up formation therefore carry information that one can exploit to assess some intrinsic material properties at the grain scale. A 3D finite element modelling of the nanoindentation test at the grain scale has been developed, making use of crystal plasticity constitutive laws. Six different virtual materials having the same macroscopic behaviour have been built. The simulation results show a good agreement with experimental tests and also a great pile-up sensitivity to interaction matrix components. These results pave the way to the interaction matrix identification using an inverse finite element method. [ABSTRACT FROM AUTHOR] |
| Copyright of International Journal of Plasticity is the property of Pergamon Press - An Imprint of Elsevier Science and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
