Low friction states for thin solid lubricant film of MoS2.
Saved in:
| Title: | Low friction states for thin solid lubricant film of MoS |
|---|---|
| Authors: | Chu, Kwang-Hua R.1 khwchu@126.com |
| Source: | Industrial Lubrication & Tribology. 2018, Vol. 70 Issue 4, p639-644. 6p. |
| Subjects: | Friction, Tribology, Thin films, Surface coatings, Resistive force |
| Abstract: | Purpose During the operation of Wendelstein 7-X (W7-X), any mechanical disturbance such as stick-slip may cause quenching of superconducting (SC) coils. The friction behavior of MoS2 lubrication (thin film) for narrow support elements between the SC coils in W7-X is rather important, as there is a design requirement for a coefficient of friction (COF) 0.05 between the sliding surfaces to control the stress contribution (from friction).Design/methodology/approach The author has carried out intensive calibrations or verifications using verified models considering previous friction tests on various samples which measured the COF in 4.2 K, 77 K and room temperature conditions (at high vacuum) to simulate the actual working condition.Findings The author has given useful explanations and diagnosis for previous anomalous scattered data. To improve the performance of MoS2, the author has predicted its better COF (0.002 via tuning of the activation volume), which could be a superlubricating state for MoS2 thin films considering the long-term operation requirement W7-X.Originality/value In this paper, the author has adopted Eyring’s approach to predict the low COF (0.002 via tuning of the activation volume), which could be a superlubricating state for MoS2 thin films considering the long-term operation requirement W7-X. Finally, some recent progresses about the possible few-layer MoS2 role in the electromagnetic loads have been provided. [ABSTRACT FROM AUTHOR] |
| Copyright of Industrial Lubrication & Tribology is the property of Emerald Publishing Limited and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
Be the first to leave a comment!
