Investigation of Thermal–Microstructure–Hardness Relationships in Dissimilar AA5052-H32/AA6061-T6 Friction Stir Welded Joints.
Saved in:
| Title: | Investigation of Thermal–Microstructure–Hardness Relationships in Dissimilar AA5052-H32/AA6061-T6 Friction Stir Welded Joints. |
|---|---|
| Authors: | Li, Wenfei1 (AUTHOR), Yakubov, Vladislav1,2 (AUTHOR), Karpenko, Michail3 (AUTHOR), Paradowska, Anna M.1,2,4 (AUTHOR) anna.paradowska@sydney.edu.au |
| Source: | Materials (1996-1944). Apr2026, Vol. 19 Issue 7, p1410. 20p. |
| Subjects: | Friction stir welding, Thermal analysis, Microstructure, Recrystallization (Metallurgy), Grain refinement, Hardness, Aluminum alloys |
| Abstract: | Highlights: All simulated peak temperatures were below the melting points of AA5052-H32 and AA6061-T6. The COMSOL model predicts thermocouple temperatures with errors within 10%. The highest temperatures in the nugget zone, combined with plastic deformation, induced dynamic recrystallisation. The minimum grain in the nugget zone was refined about eightfold relative to AA5052-H32. The AA5052-H32 TMAZ exhibited the minimum hardness with about 22% reduction. Friction stir welding (FSW) of dissimilar aluminium alloys often results in non-uniform microstructure and hardness distributions due to asymmetric temperature fields and material flow. The objective of this study is to establish a quantitative relationship between thermal history, microstructural evolution, and hardness distribution in dissimilar AA5052-H32/AA6061-T6 FSW joints by combining experimental characterisation with validated thermal modelling. AA5052-H32 and AA6061-T6 plates were welded under five different parameter sets. A thermal finite element model was developed in COMSOL Multiphysics to simulate temperature evolution during welding and was validated using embedded thermocouple measurements, with predicted peak temperatures ranging from 455 °C to 641 °C. Optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) were employed to characterise grain structure and dynamic recrystallisation (DRX) behaviour, while Vickers microhardness mapping was used to evaluate the local mechanical response. The results show that DRX occurred in the nugget zone (NZ), leading to significant grain refinement, with a minimum grain diameter of 6.07 µm, representing an approximately eightfold reduction compared with the base material AA5052-H32. In contrast, the thermo-mechanically affected zone (TMAZ) experienced limited recrystallisation due to insufficient plastic deformation and temperature. The lowest hardness was observed in the TMAZ on the AA5052-H32 side, with the hardness reduction of 22% primarily caused by work hardening loss. Hardness was also reduced by 34% on the AA6061-T6 side due to decreased precipitation strengthening caused by high temperatures. This combined experimental–numerical study provides a systematic thermal–microstructure–hardness framework for understanding and predicting local property variations in dissimilar FSW joints. [ABSTRACT FROM AUTHOR] |
| Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.) | |
| Database: | Engineering Source |
|
Full text is not displayed to guests.
Login for full access.
|
|
| FullText | Links: – Type: pdflink Text: Availability: 1 |
|---|---|
| Header | DbId: egs DbLabel: Engineering Source An: 192958772 AccessLevel: 6 PubType: Academic Journal PubTypeId: academicJournal PreciseRelevancyScore: 0 |
| IllustrationInfo | |
| Items | – Name: Title Label: Title Group: Ti Data: Investigation of Thermal–Microstructure–Hardness Relationships in Dissimilar AA5052-H32/AA6061-T6 Friction Stir Welded Joints. – Name: Author Label: Authors Group: Au Data: <searchLink fieldCode="AR" term="%22Li%2C+Wenfei%22">Li, Wenfei</searchLink><relatesTo>1</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Yakubov%2C+Vladislav%22">Yakubov, Vladislav</searchLink><relatesTo>1,2</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Karpenko%2C+Michail%22">Karpenko, Michail</searchLink><relatesTo>3</relatesTo> (AUTHOR)<br /><searchLink fieldCode="AR" term="%22Paradowska%2C+Anna+M%2E%22">Paradowska, Anna M.</searchLink><relatesTo>1,2,4</relatesTo> (AUTHOR)<i> anna.paradowska@sydney.edu.au</i> – Name: TitleSource Label: Source Group: Src Data: <searchLink fieldCode="JN" term="%22Materials+%281996-1944%29%22">Materials (1996-1944)</searchLink>. Apr2026, Vol. 19 Issue 7, p1410. 20p. – Name: Subject Label: Subjects Group: Su Data: <searchLink fieldCode="DE" term="%22Friction+stir+welding%22">Friction stir welding</searchLink><br /><searchLink fieldCode="DE" term="%22Thermal+analysis%22">Thermal analysis</searchLink><br /><searchLink fieldCode="DE" term="%22Microstructure%22">Microstructure</searchLink><br /><searchLink fieldCode="DE" term="%22Recrystallization+%28Metallurgy%29%22">Recrystallization (Metallurgy)</searchLink><br /><searchLink fieldCode="DE" term="%22Grain+refinement%22">Grain refinement</searchLink><br /><searchLink fieldCode="DE" term="%22Hardness%22">Hardness</searchLink><br /><searchLink fieldCode="DE" term="%22Aluminum+alloys%22">Aluminum alloys</searchLink> – Name: Abstract Label: Abstract Group: Ab Data: Highlights: All simulated peak temperatures were below the melting points of AA5052-H32 and AA6061-T6. The COMSOL model predicts thermocouple temperatures with errors within 10%. The highest temperatures in the nugget zone, combined with plastic deformation, induced dynamic recrystallisation. The minimum grain in the nugget zone was refined about eightfold relative to AA5052-H32. The AA5052-H32 TMAZ exhibited the minimum hardness with about 22% reduction. Friction stir welding (FSW) of dissimilar aluminium alloys often results in non-uniform microstructure and hardness distributions due to asymmetric temperature fields and material flow. The objective of this study is to establish a quantitative relationship between thermal history, microstructural evolution, and hardness distribution in dissimilar AA5052-H32/AA6061-T6 FSW joints by combining experimental characterisation with validated thermal modelling. AA5052-H32 and AA6061-T6 plates were welded under five different parameter sets. A thermal finite element model was developed in COMSOL Multiphysics to simulate temperature evolution during welding and was validated using embedded thermocouple measurements, with predicted peak temperatures ranging from 455 °C to 641 °C. Optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD) were employed to characterise grain structure and dynamic recrystallisation (DRX) behaviour, while Vickers microhardness mapping was used to evaluate the local mechanical response. The results show that DRX occurred in the nugget zone (NZ), leading to significant grain refinement, with a minimum grain diameter of 6.07 µm, representing an approximately eightfold reduction compared with the base material AA5052-H32. In contrast, the thermo-mechanically affected zone (TMAZ) experienced limited recrystallisation due to insufficient plastic deformation and temperature. The lowest hardness was observed in the TMAZ on the AA5052-H32 side, with the hardness reduction of 22% primarily caused by work hardening loss. Hardness was also reduced by 34% on the AA6061-T6 side due to decreased precipitation strengthening caused by high temperatures. This combined experimental–numerical study provides a systematic thermal–microstructure–hardness framework for understanding and predicting local property variations in dissimilar FSW joints. [ABSTRACT FROM AUTHOR] – Name: AbstractSuppliedCopyright Label: Group: Ab Data: <i>Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract.</i> (Copyright applies to all Abstracts.) |
| PLink | https://search.ebscohost.com/login.aspx?direct=true&site=eds-live&db=egs&AN=192958772 |
| RecordInfo | BibRecord: BibEntity: Identifiers: – Type: doi Value: 10.3390/ma19071410 Languages: – Code: eng Text: English PhysicalDescription: Pagination: PageCount: 20 StartPage: 1410 Subjects: – SubjectFull: Friction stir welding Type: general – SubjectFull: Thermal analysis Type: general – SubjectFull: Microstructure Type: general – SubjectFull: Recrystallization (Metallurgy) Type: general – SubjectFull: Grain refinement Type: general – SubjectFull: Hardness Type: general – SubjectFull: Aluminum alloys Type: general Titles: – TitleFull: Investigation of Thermal–Microstructure–Hardness Relationships in Dissimilar AA5052-H32/AA6061-T6 Friction Stir Welded Joints. Type: main BibRelationships: HasContributorRelationships: – PersonEntity: Name: NameFull: Li, Wenfei – PersonEntity: Name: NameFull: Yakubov, Vladislav – PersonEntity: Name: NameFull: Karpenko, Michail – PersonEntity: Name: NameFull: Paradowska, Anna M. IsPartOfRelationships: – BibEntity: Dates: – D: 01 M: 04 Text: Apr2026 Type: published Y: 2026 Identifiers: – Type: issn-print Value: 19961944 Numbering: – Type: volume Value: 19 – Type: issue Value: 7 Titles: – TitleFull: Materials (1996-1944) Type: main |
| ResultId | 1 |
