View in EDS

Comparison of surface morphologies of SiO2 films prepared by ion-beam induced chemical vapor deposition and ion-beam assisted deposition

Saved in:
Bibliographic Details
Title: Comparison of surface morphologies of SiO2 films prepared by ion-beam induced chemical vapor deposition and ion-beam assisted deposition
Authors: Matsutani, T.1 t-matsutani@aist.go.jp, Asanuma, T.1, Liu, C.1, Kiuchi, M.1, Takeuchi, T.2
Source: Nuclear Instruments & Methods in Physics Research Section B. May2003, Vol. 206 Issue 1-4, p343. 5p.
Subjects: Silica, Ion bombardment
Abstract: The surface topographies of silicon dioxide films prepared by low-energy ion-beam induced chemical vapor deposition (IBICVD) and ion-beam assisted deposition (IBAD) were studied using an atomic force microscopy (AFM). In the case of IBICVD, when prepared using bubbled hexamethyldisiloxane (HMDSO) and assisted O2 gas under irradiation of 150 eV Ar ions, the root mean square (RMS) of the surface roughness of the film was 2.0 nm. However, when prepared using the bubbled HMDSO under irradiation of 150 eV oxygen ions, the RMS deduced to 0.25 nm. In the case of IBAD, when deposited using evaporated silicon monoxide under irradiation of 150 eV oxygen ions, the RMS was 0.20 nm. As a reference, the RMS of fused silica was changed from original 0.70–0.40 nm after irradiated of 150 eV oxygen ions. It is concluded that low-energy oxygen ion bombardment not only promotes chemical reaction and dissociation of precursor but also leads to a smooth surface due to reactive ion beam etching on the film surface. [Copyright &y& Elsevier]
Copyright of Nuclear Instruments & Methods in Physics Research Section B is the property of Elsevier B.V. and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:The surface topographies of silicon dioxide films prepared by low-energy ion-beam induced chemical vapor deposition (IBICVD) and ion-beam assisted deposition (IBAD) were studied using an atomic force microscopy (AFM). In the case of IBICVD, when prepared using bubbled hexamethyldisiloxane (HMDSO) and assisted O2 gas under irradiation of 150 eV Ar ions, the root mean square (RMS) of the surface roughness of the film was 2.0 nm. However, when prepared using the bubbled HMDSO under irradiation of 150 eV oxygen ions, the RMS deduced to 0.25 nm. In the case of IBAD, when deposited using evaporated silicon monoxide under irradiation of 150 eV oxygen ions, the RMS was 0.20 nm. As a reference, the RMS of fused silica was changed from original 0.70–0.40 nm after irradiated of 150 eV oxygen ions. It is concluded that low-energy oxygen ion bombardment not only promotes chemical reaction and dissociation of precursor but also leads to a smooth surface due to reactive ion beam etching on the film surface. [Copyright &y& Elsevier]
ISSN:0168583X
DOI:10.1016/S0168-583X(03)00759-6