View in EDS

Biochar integrated reactive filtration of wastewater for P removal and recovery, micropollutant catalytic oxidation, and negative CO2e: Process operation and mechanism.

Saved in:
Bibliographic Details
Title: Biochar integrated reactive filtration of wastewater for P removal and recovery, micropollutant catalytic oxidation, and negative CO2e: Process operation and mechanism.
Authors: Yu, Paulo1 (AUTHOR), Baker, Martin C.1 (AUTHOR), Crump, Alex R.1 (AUTHOR), Vogler, Michael1 (AUTHOR), Strawn, Daniel G.1 (AUTHOR), Möller, Gregory1,2 (AUTHOR) gmoller@uidaho.edu
Source: Water Environment Research (10614303). Sep2023, Vol. 95 Issue 9, p1-22. 22p.
Subjects: Micropollutants, Catalytic oxidation, Biochar, Resource recovery facilities, Environmental quality, Water purification, Ferric oxide
Abstract: Biochar (BC) use in water treatment is a promising approach that can simultaneously help address societal needs of clean water, food security, and climate change mitigation. However, novel BC water treatment technology approaches require operational testing in field pilot‐scale scenarios to advance their technology readiness assessment. Therefore, the objective of this study is to evaluate the system performance of BC integrated into hydrous ferric oxide reactive filtration (Fe‐BC‐RF) with and without catalytic ozonation (CatOx) process in laboratory and field pilot‐scale scenarios. For this investigation, Fe‐BC‐RF and Fe‐CatOx‐BC‐RF pilot‐scale trials were conducted on synthetic lake water variants and at three municipal water resource recovery facilities (WRRFs) at process flows of 0.05 and 0.6 L/s, respectively. Three native and two iron‐modified BCs were used in these studies. The commercially available reactive filtration process (Fe‐RF without BC) had 96%–98% total phosphorus (TP) removal from 0.075‐ and 0.22‐mg/L TP, as orthophosphate process influent in these trials. With BC integration, phosphorus removal yielded 94%–98% with the same process‐influent conditions. In WRRF field pilot‐scale studies, the Fe‐CatOx‐BC‐RF process removed 84%–99% of influent total phosphorus concentrations that varied from 0.12 to 8.1 mg/L. Nutrient analysis on BC showed that the recovered BC used in the pilot‐scale studies had an increase in TP from its native concentration, with the Fe‐amended BC showing better P recovery at 110% than its unmodified state, which was 16%. Lastly, the field WRRF Fe‐CatOx‐BC‐RF process studies showed successful destructive removals at >90% for more than 20 detected micropollutants, thus addressing a critical human health and environmental water quality concern. The research demonstrated that integration of BC into Fe‐CatOx‐RF for micropollutant removal, disinfection, and nutrient recovery is an encouraging tertiary water treatment technology that can address sustainable phosphorus recycling needs and the potential for carbon‐negative operation. Practitioner Points: A pilot‐scale hydrous ferric oxide reactive sand filtration process integrating biochar injection typically yields >90% total phosphorus removal to ultralow levels.Biochar, modified with iron, recovers phosphorus from wastewater, creating a P/N nutrient upcycled soil amendment.Addition of ozone to the process stream enables biochar‐iron‐ozone catalytic oxidation demonstrating typically excellent (>90%) micropollutant destructive removals for the compounds tested.A companion paper to this work explores life cycle assessment (LCA) and techno‐economic analysis (TEA) to explore biochar water treatment integrated reactive filtration impacts, costs, and readiness.Biochar use can aid in long‐term carbon sequestration by reducing the carbon footprint of advanced water treatment in a dose‐dependent manner, including enabling an overall carbon‐negative process. [ABSTRACT FROM AUTHOR]
Copyright of Water Environment Research (10614303) is the property of Wiley-Blackwell and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:Biochar (BC) use in water treatment is a promising approach that can simultaneously help address societal needs of clean water, food security, and climate change mitigation. However, novel BC water treatment technology approaches require operational testing in field pilot‐scale scenarios to advance their technology readiness assessment. Therefore, the objective of this study is to evaluate the system performance of BC integrated into hydrous ferric oxide reactive filtration (Fe‐BC‐RF) with and without catalytic ozonation (CatOx) process in laboratory and field pilot‐scale scenarios. For this investigation, Fe‐BC‐RF and Fe‐CatOx‐BC‐RF pilot‐scale trials were conducted on synthetic lake water variants and at three municipal water resource recovery facilities (WRRFs) at process flows of 0.05 and 0.6 L/s, respectively. Three native and two iron‐modified BCs were used in these studies. The commercially available reactive filtration process (Fe‐RF without BC) had 96%–98% total phosphorus (TP) removal from 0.075‐ and 0.22‐mg/L TP, as orthophosphate process influent in these trials. With BC integration, phosphorus removal yielded 94%–98% with the same process‐influent conditions. In WRRF field pilot‐scale studies, the Fe‐CatOx‐BC‐RF process removed 84%–99% of influent total phosphorus concentrations that varied from 0.12 to 8.1 mg/L. Nutrient analysis on BC showed that the recovered BC used in the pilot‐scale studies had an increase in TP from its native concentration, with the Fe‐amended BC showing better P recovery at 110% than its unmodified state, which was 16%. Lastly, the field WRRF Fe‐CatOx‐BC‐RF process studies showed successful destructive removals at >90% for more than 20 detected micropollutants, thus addressing a critical human health and environmental water quality concern. The research demonstrated that integration of BC into Fe‐CatOx‐RF for micropollutant removal, disinfection, and nutrient recovery is an encouraging tertiary water treatment technology that can address sustainable phosphorus recycling needs and the potential for carbon‐negative operation. Practitioner Points: A pilot‐scale hydrous ferric oxide reactive sand filtration process integrating biochar injection typically yields >90% total phosphorus removal to ultralow levels.Biochar, modified with iron, recovers phosphorus from wastewater, creating a P/N nutrient upcycled soil amendment.Addition of ozone to the process stream enables biochar‐iron‐ozone catalytic oxidation demonstrating typically excellent (>90%) micropollutant destructive removals for the compounds tested.A companion paper to this work explores life cycle assessment (LCA) and techno‐economic analysis (TEA) to explore biochar water treatment integrated reactive filtration impacts, costs, and readiness.Biochar use can aid in long‐term carbon sequestration by reducing the carbon footprint of advanced water treatment in a dose‐dependent manner, including enabling an overall carbon‐negative process. [ABSTRACT FROM AUTHOR]
ISSN:10614303
DOI:10.1002/wer.10926