View in EDS PDF Full Text

INFLUENCE OF SELECTED PARAMETERS OF THE THERMOMECHANICAL ROLLING PROCESS OF HSLA STEEL ON THE TRANSFORMATION OF AUSTENITE INTO FERRITE.

Saved in:
Bibliographic Details
Title: INFLUENCE OF SELECTED PARAMETERS OF THE THERMOMECHANICAL ROLLING PROCESS OF HSLA STEEL ON THE TRANSFORMATION OF AUSTENITE INTO FERRITE.
Authors: HAMRYSZCZAK, T.1,2 tomasz.hamryszczak@agh.edu.pl, ZAPF, M.3, ŚLEBODA, T.1, KORPAŁA, G.3, PRAHL, U.3
Source: Archives of Metallurgy & Materials. 2025, Vol. 70 Issue 4, p1493-1497. 5p.
Subjects: Austenite, Ferrites, Low alloy steel, Strains & stresses (Mechanics), Thermomechanical treatment, Thermal expansion measurement, Phase transitions
Abstract: The study analyzed two selected representative HSLA steels rolled at the Krakow branch of ArcelorMittal Poland S.A. The aim of the analysis was to determine the effect of parameters such as strain and cooling rate on the onset temperature of the transformation from austenite to ferrite. Dilatometric tests were carried out, followed by strain dilatometry. The cooling rate was varied and its relationship with the temperature of the beginning of austenite to ferrite transformation (Ar3) was determined. In the second part of the study, the subject literature was analyzed to find out how quickly the Ar3 temperature could be calculated. The available equations for calculating the Ar3 temperature were checked. However, the results of the calculations were not consistent enough to use these equations in the actual process. Therefore, the authors decided to develop their own equation – the proposed solution allows the calculation of the Ar3 temperature for the two selected HSLA steels mentioned above with an accuracy of several degrees and a correlation of more than 90%. [ABSTRACT FROM AUTHOR]
Copyright of Archives of Metallurgy & Materials is the property of Polish Academy of Sciences and its content may not be copied or emailed to multiple sites without the copyright holder's express written permission. Additionally, content may not be used with any artificial intelligence tools or machine learning technologies. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)
Database: Engineering Source
Description
Abstract:The study analyzed two selected representative HSLA steels rolled at the Krakow branch of ArcelorMittal Poland S.A. The aim of the analysis was to determine the effect of parameters such as strain and cooling rate on the onset temperature of the transformation from austenite to ferrite. Dilatometric tests were carried out, followed by strain dilatometry. The cooling rate was varied and its relationship with the temperature of the beginning of austenite to ferrite transformation (Ar3) was determined. In the second part of the study, the subject literature was analyzed to find out how quickly the Ar3 temperature could be calculated. The available equations for calculating the Ar3 temperature were checked. However, the results of the calculations were not consistent enough to use these equations in the actual process. Therefore, the authors decided to develop their own equation – the proposed solution allows the calculation of the Ar3 temperature for the two selected HSLA steels mentioned above with an accuracy of several degrees and a correlation of more than 90%. [ABSTRACT FROM AUTHOR]
ISSN:17333490
DOI:10.24425/amm.2025.156229